12/04/2026 5:26 am
Topic starter
Notifications
Clear all
0
So I finally did it and bought that 65 inch Sony OLED everyone talks about but now I am literally staring at the box and I am terrified to move it. It was so expensive and I have never actually mounted anything on a wall before like ever besides maybe a small picture frame once. My biggest fear is that I am gonna wake up and find it shattered on the floor because I chose the wrong bracket or something. I live in this older apartment building in Denver and the walls feel kinda thin so I dont even know if it can hold something that heavy and expensive without ripping the drywall out.
I have about 100 dollars left to spend on a mount and I really need to get this set up by Friday because I have friends coming over for a watch party. I keep seeing all these terms like VESA and full motion and tilting and I have no idea what any of it means or if one is safer than the other for a thin screen like the Sony. Is there a specific brand that is like the gold standard for not dropping your TV? I really dont want to mess this up and ruin the screen on day one. Does anyone have a specific mount they use for their 65 inch Sony that is easy for a total beginner to install without breaking the wall? I'm sorry if this is a really basic thing to ask I just really dont want to break my new TV...
5 Answers
10
12/04/2026 11:27 am
I've had my 65 inch hanging on an Echogear EGLT3 Tilting TV Wall Mount for three years now and honestly it has been rock solid. I remember that same fear when I first moved into my 1920s flat. One huge tip: buy a real stud finder, not the cheap magnetic ones. Quick question tho, are your walls drywall or that old school plaster and lath? That changes how you'll anchor it.
10
12/04/2026 11:27 am
To add to the point above: honestly be super careful with those old Denver buildings. I once tried to mount a screen in a 1940s walk-up and the studs were basically just thin strips. Before you buy anything, do you know if you have real wood studs or is it lath and plaster?
- Consider the Sanus VLT6-B1 Tilting TV Wall Mount because its built like a tank.
- Buy a real level, the box ones suck.
10
12/04/2026 11:32 am
I've had my 65 inch hanging on an Echogear EGLT3 Tilting TV Wall Mount for three years now and honestly it has been rock solid. I remember that same fear when I first moved into my 1920s flat. One huge tip: buy a real stud finder, not the cheap magnetic ones. Quick question tho, are your walls drywall or that old school plaster and lath? That changes how you'll anchor it.
10
12/04/2026 11:32 am
To add to the point above: honestly be super careful with those old Denver buildings. I once tried to mount a screen in a 1940s walk-up and the studs were basically just thin strips. Before you buy anything, do you know if you have real wood studs or is it lath and plaster?
- Consider the Sanus VLT6-B1 Tilting TV Wall Mount because its built like a tank.
- Buy a real level, the box ones suck.
1
12/04/2026 5:27 am
Nice pick on the Sony. Those panels are incredibly thin, so you really want to be careful when handling the screen to avoid any flexing. Since you're in an older Denver apartment, I would suggest being extra cautious with the wall structure. You absolutely must find the wood studs; do not ever rely on drywall anchors for a 65-inch OLED. A few things to keep in mind:
- Use a reliable stud finder to find the center of the wood.
- Stick to a fixed mount rather than a full-motion arm to keep the center of gravity close to the wall.
- Check your VESA pattern, which is basically just the hole spacing on the back. I use the Sanus VLL5-B1 Fixed-Position Wall Mount for 32-80 inch TVs for my installs. It is very sturdy and stays under budget. Make sure to pre-drill your pilot holes so you dont crack the old wood in those walls... it will be fine if you hit the studs.
