> I’m looking to move both my original "fat" PS4 and my PS4 Pro into vertical positions. I’m a bit nervous about them tipping over or overheating... Do you guys prefer the official Sony stands, or are there third-party ones? sooo i totally get the struggle of trying to save desk space lol. i was in the same boat last year cuz my gaming desk is basically a shoebox and i have both consoles too. honestly i was super scared about them falling over or getting too hot... especially that LOUD Pro fan!! tbh i wouldnt spend a ton of money on the official Sony PlayStation 4 Vertical Stand because it usually costs like $25 or $30 for just a piece of plastic. its STURDY but like... for that price? i think i found a better way to save money. for my original fat console i just used a basic Kootek Vertical Stand for PS4 Regular which was only about $12. it has some clips that hold it tight so it wont tip over if u bump it. but be careful with the ones that have built-in fans. i tried a cheap one and it was sooo loud it literally drove me crazy... i ended up just not plugging the fan in. for the Pro, since u mentioned the noise, maybe check out the OIVO PS4 Pro Vertical Stand? it usually goes for around $15-20 on sale. it has charging docks for the controllers too which is nice. i was worried about blocking vents too but most of these have gaps for airflow. i guess just make sure u dont push it right against a wall?? anyway i'm still kinda new to this setup stuff but i think the cheap third-party stands are fine if u just want stability. just dont expect the fans to do much cooling tbh... good luck! 👍

Coming back to this, just sharing my experience: I went through this same situation last year trying to cram my Pro and OG models into a tiny desk setup. Honestly, I wasted a lot of cash on those 'super cooling' stands that basically just ended up being noisy plastic junk!! In my experience, those tiny fans actually disrupt the consoles natural airflow and just blow more dust inside. Here is why I switched to cheaper, simpler mounts:
- Active cooling is a gimmick. It draws power from your USB port and usually does nothing for temps.
- Stability is what matters. I swapped the fancy stuff for the Younik PS4 Pro Console Holder since it has a much wider footprint for a fraction of the Sony price.
- For the fat PS4, I actually found the ADZ PS4 Original Console Stand to be way more cost-effective and surprisingly sturdy. Lowkey, if ur Pro is still loud, it probably needs a deep clean or new thermal paste, cuz a stand wont fix that... but yeah, definitely stick to the basic, solid plastic bases to save some money! gl!!

Honestly, if youve been running these consoles for years like I have, the real long-term concern isnt just the heat, its the center of gravity. The Pro is heavy and definitely feels top-heavy when sitting vertical. Instead of a traditional desk stand that can still be bumped over by a pet or a cable snag, I shifted my entire setup to HIDEit 4P PS4 Pro Wall Mount and the HIDEit 4 PS4 Original Wall Mount. Basically, it gets them off your desk entirely and eliminates the tipping risk 100%. If you really wanna keep them on the desk though, look for something like the NexiGo Vertical Stand for PS4 Pro. It has a much wider base plate than the Sony official one, which is crucial for lateral stability on a desk that might wobble. Some technical things to keep in mind for long-term health:

• Make sure the stand has a recessed air channel. If its flush against the intake, your fan is gonna ramp up immediately.
• Check the rubber padding on the bottom. Cheap ones dry out and slide around, which defeats the purpose of a stand.
• Avoid anything that draws power from the front USB ports for cooling as it just adds load to the internal power supply. Tbh, wall mounting is the pro move if you wanna maximize that desk space for real.

Would love to know this too

- Stick with official Sony mounts.
- Avoid fan stands; they're low-quality and don't help thermals.
Just get any solid PowerA stand cuz they keep vents clear tbh

Honestly, looking at the current market right now, there's a massive gap between the cheap "white-label" brands you see all over Amazon and the actual high-end or licensed stuff. I've spent way too much time researching the build materials and stability ratings for these things, but before I give you a full breakdown of which brands are actually worth the cash, I had a couple of questions: 1. Are you looking for a single "multi-dock" solution that holds both consoles together, or are you planning on getting two separate, individual stands to space them out?
2. What's the actual surface like where they'll be sitting? Like, is it a glass desk or wood, and is it in a high-traffic area where someone might accidentally bump into them? I'm asking because some brands focus heavily on high-friction rubber bases for grip, while others use a wider footprint for tip-protection. Just want to make sure I'm giving you the most practical advice for your specific desk setup...

Ngl I spent way too much time obsessing over this exact thing back when the Pro launched. My unit sounded like a literal vacuum cleaner after about six months. Trying one of those fancy looking docks with the triple fans did basically nothing but add extra whirring noises to my room... super annoying. A few things I learned from messing with my setup:

• Airflow is all about the intake clearance on the sides.
• Physical stability matters way more if you have pets.
• External fans usually just push dust further in. Honestly if youre worried about the noise you should check out some thermal testing videos on YouTube or look at teardown guides on sites like iFixit. Seeing how the cooling fins are actually laid out inside helped me realize that most of those powered stands are just gimmicks. The simple non-powered bracket I ended up with gave the bottom some breathing room and worked out fine. The fat model is way more forgiving but that Pro really needs the space.

Honestly, if your Pro is already sounding like a jet engine, just slapping it into a vertical stand might actually make the noise worse depending on how much clearance you're giving the intake. Since you're worried about the thermals and stability, I've gotta ask a few things to see if a DIY approach or a specific mod would be better for you: - When was the last time you actually cracked open the Pro to blow out the heatsink and maybe swap the thermal paste?
- Are you planning to mount these to a wall or just have them free-standing on the desk? If you're handy with a screwdriver, there are some pretty cool low-cost DIY mods and bracket setups that'll keep it way more stable than any generic plastic stand. Tbh, if the internals are clogged, no stand in the world is gonna save that Pro from thermal throttling.

Following

ive been following this for a few hours and honestly, im pretty happy with my current non-fan setup. i totally agree with the consensus that those active cooling stands are basically just noisy paperweights that dont actually move enough air to matter. but im gonna politely disagree with the idea that only the official sony stands are stable enough. ive found that the real trick is looking for a stand with a heavy, weighted base rather than just a wide one. a lot of guys in the modding community actually just use simple heavy-gauge steel brackets with some rubber dampening. it keeps the pro from vibrating or wobbling when the disc drive spins up, which is usually when theyre most at risk of tipping. as long as youre not blocking those side intakes, youll be totally fine.